AES Show 2024 NY

In order to design efficient binaural rendering systems for 3D audio, it’s important to understand how delays in updating the relative directions of sound sources from a listener to compensate for listener’s head movements affect the sense of realism. However, sufficient study has not yet been done with this problem. We therefore investigated the delay detection capability (threshold) of hearing during localization of audio objects. We used moving sound sources emitted from loudspeakers emulating smooth update of head related transfer functions (HRTFs) and delayed update of HRTFs. We investigated the delay detection threshold with different bandwidth, direction, and speed of sound source signals. As a result, the delay detection thresholds in this experiment were found to be approximately 100ms to 500ms, and it was observed that the detection thresholds vary depending on the bandwidth and direction of the sound source. On the other hand, no significant variation in detection thresholds was observed based on the speed of sound source movement.

Datasets of processed audio signals along with subjective quality scores are instrumental for research into perception-based audio processing algorithms and objective audio quality metrics. However, openly available datasets are scarce due to listening test effort and copyright concerns limiting the distribution of audio material in existing datasets. To address this problem, Open Dataset of Audio Quality (ODAQ) was introduced, containing audio material along with extensive subjective test results with permissive licenses. The dataset comprises processed audio material with six different classes of signal impairments in multiple levels of processing strength covering a wide range of quality levels. The subjective quality evaluation has recently been extended and now comprises results from three international laboratories providing a total 42 listeners and 10080 subjective scores overall. Furthermore, ODAQ was recently expanded by a performance evaluation of common objective metrics for perceptual quality evaluation in their ability to predict subjective scores. The wide variety of audio material and test subjects in the test provides insight into influences and biases in subjective evaluation, which we investigated by statistical analysis, finding listener-based, training-based and lab-based influences. We also demonstrate the methodology for contributing to ODAQ, and make a request for additional contributors. In conclusion, the diversity of the processing methods and quality levels, along with a large pool of international listeners and permissive licenses make ODAQ particularly suited for further research into subjective and objective audio quality.

This study investigates the perceptual strengths and weaknesses of various immersive audio capture techniques within an orchestral setting, employing channel-based, object-based, and scene-based methodologies concurrently. Conducted at McGill University’s Pollack Hall in Montreal, Canada, the research featured orchestral works by Boulanger, Prokofiev, and Schubert, performed by the McGill Symphony Orchestra in April 2024.
The innovative aspect of this study lies in the simultaneous use of multiple recording techniques, employing traditional microphone setups such as a Decca tree with outriggers, alongside an experimental pyramidal immersive capture system and a 6th order Ambisonic em64 “Eigenmike.” These diverse methodologies were selected to capture the performance with high fidelity and spatial accuracy, detailing both the performance's nuances and the sonic characteristics imparted by the room. The capture of this interplay is the focus of this study.
The project aimed to document the hall's sound quality in its last orchestral performance before closing for 2 years for renovations, providing the methodology and documentation needed for future comparative recordings of the acoustics before and after. The pyramidal system, designed with exaggerated spacing, improves decorrelation at low frequencies, allowing for the impression of a large room within a smaller listening space. Meanwhile, Ambisonic recordings provided insights into single-point versus spaced multi-viewpoint capture.
Preliminary results from informal subjective listening sessions suggest that combining different systems offers potential advantages over any single method alone, supporting exploration of hybrid solutions as a promising area of study for audio recording, enhancing the realism and spatial immersion of orchestral music recordings.

We present a study on the perception of the missing fundamental in vibrational complex tones. When asked to match an audible frequency to the frequency of a vibrational tone with a missing fundamental frequency, participants in two experiments associated the audible frequency with lower frequencies than those present in the vibration, often corresponding to the missing fundamental of the vibrational tone. This association was found regardless of whether the vibration was presented on the back (first experiment) or the feet (second experiment). One possible application of this finding could be the reinforcement of low frequencies via vibrational motors even when such motors have high resonance frequencies

The ear canal geometries of individuals are very different, resulting in significant variations in SPL at the drum reference point (DRP). Knowledge of the personalized transfer function from a near-field microphone (NFM) in the earbud speaker tip to DRP allows personalized equalization (P.EQ). A method to perceptually compensate for loudness perception within the evaluation of different personalized equalization filters for earbuds has been developed. The method includes: measurements at NFM to estimate the personalized transfer function from the NFM point to DRP, calibration of the NFM microphone, the acquisition of the transfer function from the earbuds' speaker terminals to NFM, and the estimation of perceptual loudness in phones at DRP, when applying the different equalization filters. The loudness estimation was computed using the Moore-Glasberg method as implemented in ISO 532-2. The difference to DRP estimation was recursively adjusted using pink noise until the delta was within 0.1 dB. The corresponding gains were applied to the different conditions to be evaluated. A listening test was performed to evaluate three conditions using the described method for loudness compensation.

In a recent study, the authors interviewed five professional mastering engineers on the topic of contemporary loudness practices in music. Among the findings, all five mastering engineers targeted their peak levels very close to 0 dBFS and seemed somewhat unconcerned regarding true peak distortion emerging in the transcoding process, not adapting to the current recommendations of not exceeding -1 dB true peak. Furthermore, true peak measurements over the last four decades show that quite a few releases even measure true peaks above 0 dBFS in full quality. The aim of this study is to investigate the audibility of such overshoots by conducting a tailored listening test. The results indicate that even experienced and trained listeners may not be very sensitive to true peak distortion.

Extensive studies have been made into achieving generally enjoyable sound colour in headphone listening, but few publications have been written focusing on the demanding requirements of a single audio professional, and what they actually hear. The present paper describes a structured and practical method, based on in-room monitoring, for getting to know yourself as a headphone listener, and the particular model and pair you are using. Headphones provide fundamentally different listening results compared to in-room monitoring adhering to professional standards; considering imaging, auditory envelopment, localization, haptic cues etc. Moreover, in headphone listening there may be no direct connection between the frequency response measured with a generic manikin and what a given user hears. Finding out just how a pair of headphones deviates from neutral sound colour must therefore be achieved personally. An evaluation scheme based on an ultra-nearfield reference system is described, augmented by a defined test setup and procedure.